Organic electron transport materials

• Joseph Cameron and
• Peter J. Skabara

Beilstein J. Org. Chem. 2024, 20, 672–674, doi:10.3762/bjoc.20.60

• overcome in developing materials for emerging technologies, researchers working on these issues should take inspiration from the rapid progress that was achieved in the development of non-fullerene acceptor materials as a replacement for PC61BM and PC71BM in organic solar cells which revitalised the

Facile approach to N,O,S-heteropentacycles via condensation of sterically crowded 3H-phenoxazin-3-one with ortho-substituted anilines

• Eugeny Ivakhnenko,
• Vasily Malay,
• Pavel Knyazev,
• Nikita Merezhko,
• Nadezhda Makarova,
• Oleg Demidov,
• Gennady Borodkin,
• Andrey Starikov and
• Vladimir Minkin

Beilstein J. Org. Chem. 2024, 20, 336–345, doi:10.3762/bjoc.20.34

• probes, organic light-emitting diodes, and organic solar cells [2][7][8][9]. The principal way for the preparation of these heterocycles involves the coupling of 3H-phenoxazin-3-ones with variously functionalized aromatic amines. This is followed by the cyclization of the initially formed adducts [10][11

• potential for testing as potential donors for organic solar cells or as dye sensitizers for dye-sensitized solar cells [24][25]. Experimental All reagents and solvents were purchased from commercial sources (Aldrich) and used without additional purification. The compounds were characterized by 1H, 13C, and

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

Quinoxaline derivatives as attractive electron-transporting materials

• Zeeshan Abid,
• Liaqat Ali,
• Sughra Gulzar,
• Faiza Wahad,
• Raja Shahid Ashraf and
• Christian B. Nielsen

Beilstein J. Org. Chem. 2023, 19, 1694–1712, doi:10.3762/bjoc.19.124

• Abstract This review article provides a comprehensive overview of recent advancements in electron transport materials derived from quinoxaline, along with their applications in various electronic devices. We focus on their utilization in organic solar cells (OSCs), dye-sensitized solar cells (DSSCs

• processability compared to their inorganic counterparts [1][2]. Charge transport in organic semiconductors is a fundamental aspect that governs the performance and functionality of various organic semiconductor devices, such as organic solar cells (OSCs), organic field-effect transistors (OFETs), organic light

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• , which extends the degree of π-conjugation [1]. In this way, the HOMO–LUMO gap can be narrowed [2]. Low HOMO–LUMO gaps are desirable for organic solar cells as the maximum photoflux density of the sun is at ca. 700 nm, corresponding to 1.77 eV [3]. However, fused systems have the drawback of being prone

• example, ITIC (10), is shown in Figure 4. ITIC [17], in combination with polymer 11, achieved a power conversion efficiency (PCE) of 6.8%, which was the best value for NFA organic solar cells at the time of publication. Fluorination of ITIC, obtaining IT-4F (12), shown in Figure 5, reduced ELUMO. Combined

• polymer 11, also featuring a fused thiophene system, showed a remarkable PCE of 6.80%, the then best value for non-fullerene acceptor organic solar cells [17]. The fluorinated derivative of ITIC, IT-4F, achieved, with donor polymer 13, PCEs in OPVs up to 17% [8]. The non-fullerene acceptor Y6 (14) [30

Photophysical, photostability, and ROS generation properties of new trifluoromethylated quinoline-phenol Schiff bases

• Inaiá O. Rocha,
• Yuri G. Kappenberg,
• Wilian C. Rosa,
• Clarissa P. Frizzo,
• Nilo Zanatta,
• Marcos A. P. Martins,
• Isadora Tisoco,
• Bernardo A. Iglesias and
• Helio G. Bonacorso

Beilstein J. Org. Chem. 2021, 17, 2799–2811, doi:10.3762/bjoc.17.191

• interesting luminescent properties [14] that have attracted great interest because of their potential applicability in the composition of organic light-emitting diodes (OLED), organic solar cells (OSC), and biomolecular markers [15][16]. Moreover, the trifluoromethyl substituent (CF3) is an interesting

Recent advances in the application of isoindigo derivatives in materials chemistry

• Andrei V. Bogdanov and
• Vladimir F. Mironov

Beilstein J. Org. Chem. 2021, 17, 1533–1564, doi:10.3762/bjoc.17.111

• of functional materials are analyzed and summarized. These bisheterocycles can be used in the creation of organic solar cells, sensors, lithium ion batteries as well as in OFET and OLED technologies. The potentials of the use of polymer structures based on isoindigo as photoactive component in the

• construction of polymeric materials for various purposes. Review Organic solar cells (OSCs) on the base of isoindigo derivatives Since the pioneering works on the use of isoindigo derivatives in the design of OSCs [3][4][5], specialists in this field have made significant progress in tuning and improving their

• a promising platform for creating materials for various purposes – from organic solar cells and transistors to materials for biomedical applications. The possibility of easy modification and easy accessibility of the starting reagents for the synthesis of polysubstituted isoindigo derivatives

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• solar cells, [60]PCBM, as an example (Scheme 26). The mechanism of fullerene cyclopropanation is presented in Scheme 27. Using a similar procedure, the reaction of C60 and alkyl-4-benzoyl butyrate p-tosylhydrazone in the presence of sodium methoxide and pyridine, the following [6,6]-phenyl-C61-butyric

• diazo compounds in situ, without the need for purification prior to the addition of C60. The process is successful even in the presence of unstable diazo compounds, and the yield of the target product increases significantly. The technique was tested in a synthesis of an acceptor component of organic

Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• properties, a variety of functionalized derivatives, mainly trimeric DTP (SN3) [18], pentameric SN5 [19][20][21][22][23], and hexameric SN6 [24][25][26][27][28], have been successfully implemented as active semiconducting components in organic solar cells [18][19][20][21][24][25][26], perovskite solar cells

• opposite effects. The basic SN4 and SN4'' frameworks represent novel core molecules for further functionalization, for example with terminal acceptor groups, leading to highly absorbing dye molecules for application in organic solar cells. Heteroacenes: tetrathienoacene (TTA), S,N-heteroacenes SN4, SN4

Structure–property relationships and third-order nonlinearities in diketopyrrolopyrrole based D–π–A–π–D molecules

• Jan Podlesný,
• Lenka Dokládalová,
• Oldřich Pytela,
• Adam Urbanec,
• Milan Klikar,
• Numan Almonasy,
• Tomáš Mikysek,
• Jaroslav Jedryka,
• Iwan V. Kityk and
• Filip Bureš

Beilstein J. Org. Chem. 2017, 13, 2374–2384, doi:10.3762/bjoc.13.235

• pigments [2], DPPs have significantly infiltrated organic electronics as functional dyes. The number of recently appeared review articles [3][4][5][6][7][8] clearly demonstrates their wide application potential, which spans organic solar cells (OSC), organic field-effect transistors (OFET), organic light

Synthesis and application of trifluoroethoxy-substituted phthalocyanines and subphthalocyanines

• Satoru Mori and
• Norio Shibata

Beilstein J. Org. Chem. 2017, 13, 2273–2296, doi:10.3762/bjoc.13.224

• Phthalocyanines and subphthalocyanines are attracting attention as functional dyes that are applicable to organic solar cells, photodynamic therapy, organic electronic devices, and other applications. However, phthalocyanines are generally difficult to handle due to their strong ability to aggregate, so this

Effects of solvent additive on “s-shaped” curves in solution-processed small molecule solar cells

• John A. Love,
• Shu-Hua Chou,
• Ye Huang,
• Guilllermo C. Bazan and
• Thuc-Quyen Nguyen

Beilstein J. Org. Chem. 2016, 12, 2543–2555, doi:10.3762/bjoc.12.249

• separation. This yields much better performing devices, with improved curve shape, demonstrating the importance of morphology control in BHJ devices and improving the understanding of the role of solvent additives. Keywords: current voltage analysis; morphology; organic solar cells; Introduction Tremendous

• multidisciplinary research efforts have led to consistent increases in the efficiency of organic solar cells, making the technology a bright prospect in the quest for alternative energy [1][2][3][4]. In particular the rapid development of solution-processed small molecule materials over the last several years has

High performance p-type molecular electron donors for OPV applications via alkylthiophene catenation chromophore extension

• Paul B. Geraghty,
• Calvin Lee,
• Jegadesan Subbiah,
• Wallace W. H. Wong,
• James L. Banal,
• Mohammed A. Jameel,
• Trevor A. Smith and
• David J. Jones

Beilstein J. Org. Chem. 2016, 12, 2298–2314, doi:10.3762/bjoc.12.223

• devices with PTB7-Th resulting in high-performance OPV devices with up to 10.7% PCE. Keywords: molecular materials; nematic liquid crystal; organic solar cells; organic synthesis; p-type organic semiconductors; small molecule; Introduction Bulk heterojunction (BHJ) organic solar cells (OSC), a blend of

Synthesis and characterization of fluorinated azadipyrromethene complexes as acceptors for organic photovoltaics

• Forrest S. Etheridge,
• Roshan J. Fernando,
• Sandra Pejić,
• Matthias Zeller and
• Geneviève Sauvé

Beilstein J. Org. Chem. 2016, 12, 1925–1938, doi:10.3762/bjoc.12.182

• : calcd for C96H56F4N6Zn, 1633.37; found, 1629.75; anal. calcd for: C, 73.46; H, 3.45; N, 5.14; found: C, 73.42; H, 3.69; N, 5.06. Organic solar cells Photovoltaic properties were studied using the inverted configuration: ITO/ZnO/P3HT:Acceptor/MoO3/Ag. ITO-coated glass (R = 15 Ω/sq) substrates were

Effect of the π-conjugation length on the properties and photovoltaic performance of A–π–D–π–A type oligothiophenes with a 4,8-bis(thienyl)benzo[1,2-b:4,5-b′]dithiophene core

• Ni Yin,
• Lilei Wang,
• Yi Lin,
• Jinduo Yi,
• Lingpeng Yan,
• Junyan Dou,
• Hai-Bo Yang,
• Xin Zhao and
• Chang-Qi Ma

Beilstein J. Org. Chem. 2016, 12, 1788–1797, doi:10.3762/bjoc.12.169

• use in organic solar cells. In this paper, four 4,8-bis(5-alkyl-2-thienyl)benzo[1,2-b:4,5-b′]dithiophene (TBDT)-containing A–π–D–π–A-type small molecules (COOP-nHT-TBDT, n = 1, 2, 3, 4), having 2-cyano-3-octyloxy-3-oxo-1-propenyl (COOP) as terminal group and regioregular oligo(3-hexylthiophene) (nHT

• levels increased (from −5.68 to −5.34 eV) with the increase of the length of the π-conjugated bridge. Organic solar cells using the synthesized compounds as the electron donor and PC61BM as the electron acceptor were fabricated and tested. Results showed that compounds with longer oligothiophene π

• ; benzodithiophene; π-bridge; chain length effect; organic solar cell; Introduction Solution-processed organic solar cells (OSCs) are considered to be one of the most promising renewable energy technologies because of the advantages of low cost, lightweight, flexibility, and great potentials in large-scale

Star-shaped and linear π-conjugated oligomers consisting of a tetrathienoanthracene core and multiple diketopyrrolopyrrole arms for organic solar cells

• Hideaki Komiyama,
• Chihaya Adachi and
• Takuma Yasuda

Beilstein J. Org. Chem. 2016, 12, 1459–1466, doi:10.3762/bjoc.12.142

• synthesized. Based on density functional theory calculations, the star-shaped TTA-DPP4 has a larger oscillator strength than the linear TTA-DPP2, and consequently, better photoabsorption property over a wide range of visible wavelengths. The photovoltaic properties of organic solar cells based on TTA-DPP4 and

• (40–60 nm). Keywords: bulk heterojunction; diketopyrrolopyrrole; organic solar cells; star-shaped oligomers; tetrathienoanthracene; Introduction Solution-processable organic semiconductors have been intensively studied as key materials for low-cost, flexible, and large-area optoelectronic devices

• , including organic solar cells (OSCs) [1][2][3][4]. OSCs have drawn much attention as promising next-generation renewable energy sources because abundant sun-light energy can be directly converted into electricity. Recently, the power conversion efficiencies (PCEs) of OSCs based on small molecules with bulk

Separation and identification of indene–C₇₀ bisadduct isomers

• Bolong Zhang,
• Jegadesan Subbiah,
• David J. Jones and
• Wallace W. H. Wong

Beilstein J. Org. Chem. 2016, 12, 903–911, doi:10.3762/bjoc.12.88

• separation; electron acceptor; fullerene bisadduct; organic solar cell; regioisomers; Introduction Organic solar cells (OSCs) are an emerging renewable energy technology that has achieved remarkable progress over the past two decades. Compared to traditional inorganic semiconductor solar cells, OSCs promise

• a number of advantages, such as lightweight flexible devices and low-cost fabrication using roll-to-roll printing [1]. Bulk-heterojunction organic solar cells (BHJ OSC) are a specific type of OSCs which contain a blend of organic electron donor and acceptor materials as the photoactive component

Efficient synthesis of π-conjugated molecules incorporating fluorinated phenylene units through palladium-catalyzed iterative C(sp²)–H bond arylations

• Fatiha Abdelmalek,
• Fazia Derridj,
• Safia Djebbar,
• Jean-François Soulé and
• Henri Doucet

Beilstein J. Org. Chem. 2015, 11, 2012–2020, doi:10.3762/bjoc.11.218

• regioselective activation of C(sp2)–H bonds. Keywords: catalysis; C–H bond arylations; desulfitative; fluorine; palladium; Introduction Fluorinated π-conjugated oligomers increasingly receive recent interest owing to their particular applications as electronic devices (e.g., in organic solar cells) [1][2][3][4

An efficient synthesis of N-substituted 3-nitrothiophen-2-amines

• Sundaravel Vivek Kumar,
• Shanmugam Muthusubramanian,
• J. Carlos Menéndez and
• Subbu Perumal

Beilstein J. Org. Chem. 2015, 11, 1707–1712, doi:10.3762/bjoc.11.185

• -aminothiophenes have potential applications in the field of functional materials such as liquid crystals [13], nonlinear optical materials (NLOs) [14], organic solar cells [15], photonic polymers [16] and electroluminescent materials [17]. Nitrothiophenes are also important as chemotherapeutic agents and in a few

Solution processable diketopyrrolopyrrole (DPP) cored small molecules with BODIPY end groups as novel donors for organic solar cells

• Diego Cortizo-Lacalle,
• Calvyn T. Howells,
• Upendra K. Pandey,
• Joseph Cameron,
• Neil J. Findlay,
• Anto Regis Inigo,
• Tell Tuttle,
• Peter J. Skabara and
• Ifor D. W. Samuel

Beilstein J. Org. Chem. 2014, 10, 2683–2695, doi:10.3762/bjoc.10.283

• -diaza-s-indacene (BODIPY) units attached by thiophene rings have been synthesised having high molar extinction coefficients. These triads were characterised and used as donor materials in small molecule, solution processable organic solar cells. Both triads were blended with PC71BM as an acceptor in

• the triads, theoretical DFT and TDDFT calculations were performed. Keywords: BODIPY; diketopyrrolopyrrole; organic semiconductors; organic solar cells; thiophene; Introduction The discovery of photoinduced electron transfer from conjugated polymers to fullerene (C60), and the favourable

Novel indolin-2-one-substituted methanofullerenes bearing long n-alkyl chains: synthesis and application in bulk-heterojunction solar cells

• Irina P. Romanova,
• Andrei V. Bogdanov,
• Inessa A. Izdelieva,
• Vasily A. Trukhanov,
• Gulnara R. Shaikhutdinova,
• Dmitry G. Yakhvarov,
• Shamil K. Latypov,
• Vladimir F. Mironov,
• Vladimir A. Dyakov,
• Ilya V. Golovnin,
• Dmitry Yu. Paraschuk and
• Oleg G. Sinyashin

Beilstein J. Org. Chem. 2014, 10, 1121–1128, doi:10.3762/bjoc.10.111

• of low-cost and flexible solar cells [1][2][3]. Organic solar cells are mainly based on bulk heterojunctions composed of a polymer donor and a fullerene acceptor. A number of promising donor materials has been developed, whereas very few successful fullerene derivatives have been proposed. The most

Controlled synthesis of poly(3-hexylthiophene) in continuous flow

• Helga Seyler,
• Jegadesan Subbiah,
• David J. Jones,
• Andrew B. Holmes and
• Wallace W. H. Wong

Beilstein J. Org. Chem. 2013, 9, 1492–1500, doi:10.3762/bjoc.9.170

• : conjugated polymers; continuous-flow synthesis; controlled polymerization; flow chemistry; organic solar cell materials; Introduction Poly(3-hexylthiophene), P3HT, is the most investigated material in bulk heterojunction (BHJ) organic solar cells (OSC) [1]. The reasons for its dominance in the field include

• variations to this general method [6][7][8][9]. Significant quantities of materials are required for the optimization of large-area roll-to-roll printed organic solar cells [3][10]. While some of the organic semiconducting materials can be obtained commercially an a hundreds-of-grams scale, it is important

Enhancement of efficiency in organic photovoltaic devices containing self-complementary hydrogen-bonding domains

• Rohan J. Kumar,
• Jegadesan Subbiah and
• Andrew B. Holmes

Beilstein J. Org. Chem. 2013, 9, 1102–1110, doi:10.3762/bjoc.9.122

• -bonding domain has been incorporated as the electron-deficient moiety in a “push–pull” p-type molecule 2 for organic solar cells. Self-association of this domain could be monitored by 1H NMR, and at higher concentrations the compound was found to form nanostructures and organogels. In bulk heterojunction

Imidazole as a parent π-conjugated backbone in charge-transfer chromophores

• Jiří Kulhánek and
• Filip Bureš

Beilstein J. Org. Chem. 2012, 8, 25–49, doi:10.3762/bjoc.8.4

• -linker [30]. pH-triggered NLO switches 88c–93c [109]. Dibromoolefin 94 and branched chromophores 95–100 [112][113]. Imidazole as a donor–acceptor unit in CT-chromophores 101–111 [20]. Diimidazoles 112–115 used as small electron acceptors in organic solar cells [115][116]. Amino- and hydroxy

Conjugated polymers containing diketopyrrolopyrrole units in the main chain

• Bernd Tieke,
• A. Raman Rabindranath,
• Kai Zhang and
• Yu Zhu

Beilstein J. Org. Chem. 2010, 6, 830–845, doi:10.3762/bjoc.6.92

• characteristic properties of the polymers are described. Potential applications in the field of organic electronic materials such as light emitting diodes, organic solar cells and organic field effect transistors are discussed. Keywords: conjugated polymer; diketopyrrolopyrrole; electroluminescence